Clearance hole chart for inch bolts and screws according to ASME B18.2.8
One of the earliest forms of comparison. The pigment/binder ratio is the weight ratio of the sum of the pigments...
No featured images
To transfer torque from the shaft to the blade, manufacturers use a number of configurations. The two most common are bore and keyway and bore and pinholes.
Density, boiling point, evaporation rate, and flash point of common solvents
Of all the "Rules of Thumb" the issues resulting from this pose the most severe issues. While not difficult to calculate, Blade Horsepower does not correlate well to a simple Volume to power relation. Most disperser manufacturers rely on a modification of the agitator horsepower relationship.
Blade Speed (tip speed), measures how far a point on the outer most edge of the disperser blade travels in a given amount of time
The grind gauge is an instrument that indicates the fineness of grind or the presence of coarse particles and agglomeration in a dispersion. It is commonly used to determine how finely ground the particles of pigment are dispersed in a sample of paint.
Latest comments